Assembled Frame machined on my mill 4.JPG
13-Nov-2005
These are photos of my shop, and new mill, with the
assembled frame to machine the surface where the Cyclinders are
mounted. This surface was not machined when the frame was initially
machined.
The frames was balanced on the mill table and a
roller extension. Then the bottom surface of the pedistals were blocked
up and clamped with a toe clamp across the top of the frame. The the
mill table was raised off the extension.
The mill head was rotated over to allow the surface
to be machined.
Also note in picture 4 that a drawer had to be
removed from the cabinet to clear the cradle.